Pass Your 220-1101 Exam Easily With 100% Exam Passing Guarantee [2023]
220-1101 Dumps are Available for Instant Access from Pass4sures
The CompTIA 220-1101 exam consists of 90 questions and has a time limit of 90 minutes. The questions are multiple-choice and performance-based, which means that candidates may need to perform tasks in a simulated environment. The passing score for the exam is 675 out of 900.
NEW QUESTION # 110
A user that works is sales is reporting that the output on each page printed from a laser has duplicate images. Which of the following should be performed FIRST to eliminate the ghost images?
- A. Clean the toner drums and rollers
- B. Upgrade the printer firmware.
- C. Change the paper weight setting.
- D. Replace the printer's fuser.
Answer: B
NEW QUESTION # 111
A technician receives an alert indicating all VMs are down. After some troubleshooting, the technician discovers the network is out of space. To resolve the issue, the technician decides to add more space. Which of the following network types will the technician be working with?
- A. WISP
- B. SCSI
- C. SAN
- D. NAC
Answer: C
Explanation:
A storage area network (SAN) is the type of network that the technician will be working with when adding more space to resolve the issue of all VMs being down due to the network being out of space. A SAN is a network that provides access to consolidated and block-level data storage, which can be used for virtualization and backup purposes. SCSI is a type of interface that connects devices such as hard drives and optical drives to a computer. NAC is a type of security solution that controls access to a network based on policies and device compliance. WISP is a type of internet service provider that delivers wireless broadband access over long distances.
NEW QUESTION # 112
Which of the following describes the main difference between T568A and T568B cabling standards?
- A. The T568B data transfer rate is higher than T568A.
- B. The standards use different cable connectors.
- C. The green and the orange cables are interchanged.
- D. T568A is used in blue cables, and T568B is used in green cables.
Answer: C
Explanation:
Explanation
he main difference between T568A and T568B cabling standards is that the green and orange cables are interchanged12. T568A is designed for backward compatibility with older telephone wires, while T568B is designed for better signal isolation and noise protection for newer networking systems and products3. T568A is used in blue cables, and T568B is used in green cables . The standards use the same cable connectors3.
NEW QUESTION # 113
An office manager reports that a printer is experiencing performance issues. Printouts are smudging when they are handled, and. recently, whenever the manager tries to print oversized documents, the paper jams before anything is printed on it.
Answer:
Explanation:
NEW QUESTION # 114
A server administrator is building a new application server. Which of the following, RAID levels provides MAXIMUM performance and redundancy?
- A. RAID 5
- B. RAID 10
- C. RAID 1
- D. RAID 0
Answer: B
Explanation:
RAID 10 is a combination of RAID 1 and RAID 0, which provides both performance and redundancy. RAID 1 mirrors data across two or more disks, while RAID 0 stripes data across two or more disks. RAID 10 combines these two methods to create a mirrored stripe set, which can tolerate multiple disk failures as long as they are not in the same mirror. RAID 10 requires at least four disks and offers better performance than RAID 5, which uses parity to provide redundancy. Reference: https://www.comptia.org/blog/what-is-raid-0-1-5-6-10
NEW QUESTION # 115
A customer reports that access to the network fileshare has become much slower than usual, but local applications do not seem to have trouble. The technician checks the download bandwidth and finds no issues. Which of the following should the technician check NEXT?
- A. RAID array drive health
- B. Customer use of two-factor authentication
- C. Amount of local drive space
- D. Level of network utilization
Answer: D
NEW QUESTION # 116
A user who works with sensitive data has a computer configured with hard drive encryption The TPM is active and hosting the encrypted key. After an upgrade to the motherboard. RAM and video card the hard drive is not booting and data cannot be accessed from the hard drive. Which of the following should the technician do to enable the system to boot again and get access to the stored data?
- A. Use data recovery software to find and recover the hard drive information
- B. Access the BIOS and select to rebuild the degraded RAID array
- C. Boot into the BIOS and enable the TPM on the new motherboard.
- D. Return the replaced motherboard back to the computer
Answer: A
NEW QUESTION # 117
A user is installing a new display on a desktop computer that only has a single DVI port for video input and a single HDMI port tot video output Which of me following does the technician need to complete the setup?
- A. A/v switcher
- B. DisplayPort to HDMI adapter
- C. DVI to HDMI cable
- D. DigitaMo-analog converter
Answer: C
Explanation:
Explanation
The technician will need to connect the DVI port on the computer to the new display's HDMI port. To do this, a DVI to HDMI cable will be needed. This type of cable will allow the computer's DVI video signal to be transmitted to the new display's HDMI port.
A digital-to-analog converter (DAC) is used to convert a digital signal to an analog signal. An A/V switcher is used to switch between multiple audio and video sources and display them on a single monitor or display. A DisplayPort to HDMI adapter is used to convert a DisplayPort signal to an HDMI signal, but it is not necessary in this scenario as the computer has a DVI port and not a DisplayPort.
NEW QUESTION # 118
A startup is looking to immediately expand its data center but does not have the personnel or space to manage everything internally. The organization has multiple small offices and remote users with large computational and storage-solution requirements. Funding is not an issue for the company. Which of the following can BEST accomplish the company's goals?
- A. laaS
- B. ISP
- C. SaaS
- D. SON
Answer: A
NEW QUESTION # 119
Which of the following concepts would be used by an online retailer to quickly add more web servers during peak sales times?
- A. Metered service
- B. Rapid elasticity
- C. Community cloud
- D. High availability
Answer: B
NEW QUESTION # 120
A technician is monitoring all outbound traffic in a SOHO. Which of the following is the MOST cost-effective solution to monitor the traffic?
- A. Lookback plug
- B. Toner probe
- C. Spectrum analyzer
- D. Network tap
Answer: D
Explanation:
Explanation
A network tap is used to intercept the signals passing over a cable and send them to a packet or protocol analyzer. Taps are either powered or unpowered:
NEW QUESTION # 121
A laptop's external webcam software is running, but it shows no image or video. Which of the following should a technician perform FIRST?
- A. Restart the computer and run system diagnostics.
- B. Reseat the webcam.
- C. Reinstall the webcam software and drivers.
- D. Research new webcam firmware.
Answer: B
NEW QUESTION # 122
The Chief Executive Officer wants to ensure company data is stored in a manner that provides the company with complete control over how the data is managed. Which of the following is the BEST cloud deployment model for this request?
- A. Community
- B. Public
- C. Private
- D. Hybrid
Answer: C
Explanation:
Explanation
A private cloud deployment model provides the company with complete control over how the data is managed. This is because a private cloud is managed solely by the organization and resides on-premises or in a data center. Therefore, a private cloud deployment model is the best option for this scenario.
NEW QUESTION # 123
A network administrator was notified that laptop users are unable to access or ping any network resources on the corporate network. Which of the following should the network administrator check FIRST?
- A. DHCP
- B. AAA
- C. ARP
- D. DHB
Answer: A
Explanation:
Domain Name System (DNS) is an Internet service that translates domain names (e.g., its.umich.edu) into IP addresses. Dynamic Host Configuration Protocol (DHCP) is a protocol for automatically assigning IP addresses and other configurations to devices when they connect to a network.
NEW QUESTION # 124
A company just bought a printer capable of automatically printing on both sides of the paper After installation, however, the technician can only print on both sides of the paper manually. Which of the following should the technician do to fix the issue?
- A. Contact the vendor for a hardware replacement.
- B. Read the installation manual and configure duplex settings.
- C. Install the most recent firmware upgrade available for the printer.
- D. Reinstall the printer software and drivers, and then restart the printer.
Answer: B
Explanation:
The issue described in the question is most likely due to an incorrect configuration of the printer's duplex settings. To enable automatic duplex printing, the technician needs to read the printer's installation manual to understand how to configure the printer's duplex settings correctly. Once the settings are configured, the printer should be able to print on both sides of the paper automatically.
To fix the issue of a newly installed printer capable of automatically printing on both sides of the paper but only printing on both sides manually, the technician should read the installation manual and configure duplex settings. Duplex printing settings can be configured in the printer driver software, which can be accessed through the printer settings in the Control Panel. Installing the most recent firmware upgrade available for the printer, contacting the vendor for a hardware replacement, or reinstalling the printer software and drivers and restarting the printer will not resolve the issue.
NEW QUESTION # 125
A user called the help desk to report an issue with a laptop. Recently, the user has been unable to click the buttons on the track pad or press some keys on the keyboard. The technician inspector the laptop but does not find any physical damage caused by the user. Which of the following is the MOST likely cause of the issue?
- A. Failed accelerometer
- B. Damaged digitizer
- C. Distended capacitors
- D. Swollen battery
Answer: D
Explanation:
The most likely cause of the issue is that the laptop has a swollen battery, which is a condition where the battery expands due to gas buildup inside the cells. A swollen battery can cause physical damage to the laptop, such as pushing against the track pad or keyboard and preventing them from functioning properly. The technician should inspect the battery and replace it if it is swollen. A damaged digitizer is not the cause of the issue, as the digitizer is a component that converts touch input into digital signals, and it does not affect the track pad or keyboard. Distended capacitors are not the cause either, as capacitors are electronic components that store electric charge, and they do not affect the track pad or keyboard. A failed accelerometer is not the cause as well, as an accelerometer is a sensor that measures acceleration, and it does not affect the track pad or keyboard. Reference: https://www.comptia.org/blog/what-is-a-laptop-battery
NEW QUESTION # 126
A technician is working on a desktop PC and wants to verify its NIC is functional. Which of the following should the technician use?
- A. Cable tester
- B. Network tap
- C. Toner probe
- D. Loopback Plug
Answer: D
Explanation:
A loopback plug is a device that can be used to test the functionality of a network interface card (NIC) by sending and receiving data packets from itself. The loopback plug connects to the NIC's port and simulates a network connection without requiring another device or cable. The technician can use a loopback plug to verify that the NIC is able to transmit and receive data without errors or interruptions. Reference: https://www.comptia.org/training/books/a-core-1-220-1101-study-guide (page 76)
NEW QUESTION # 127
A technician is working to connect an RS-232 serial signature pad to a customer's ultralightweight laptop.
Which of the following should the technician use to install the device?
- A. Wi-Fi Direct
- B. Port replicator
- C. USB-C cable
- D. Hotspot
Answer: C
Explanation:
Explanation
A USB-C cable is the best option for installing an RS-232 serial signature pad to an ultralightweight laptop.
USB-C is a universal connector that supports various protocols and devices, including serial devices. A port replicator is a device that expands the connectivity options of a laptop by providing additional ports. Wi-Fi Direct is a wireless technology that allows devices to connect directly without a router or access point. Hotspot is a feature that allows a device to share its internet connection with other devices via Wi-Fi, Bluetooth, or USB.
NEW QUESTION # 128
A desktop support technician is building a new desktop that features the fastest internal storage. Which of the following BEST suits this request1?
- A. SATASSD
- B. PCIe SATA HDD
- C. SATA HDD
- D. M2PCIeNVMeSSD
Answer: D
NEW QUESTION # 129
A technician is preparing to set up a gaming computer with the following components:
Discrete, high-end graphics card
Video capture card
High-end processor
Multiple hard drives
USB 3.0 hub
Sound card
Which of the following options is the MOST important for the technician to consider before building the gaming computer?
- A. Modular power supply
- B. Power supply wattage rating
- C. 20-pin vs. 24-pin power adapter
- D. Redundant power supply
Answer: B
NEW QUESTION # 130
A help desk technician receives a ticket stating a printer has jammed several times today. The technician removes the jammed paper and notices the paper supply is low and the paper in the tray is wrinkled. Which of the following MOST likely caused the paper jams?
- A. Page orientation
- B. Multipage misfeed
- C. Driver mismatch
- D. High latency
Answer: B
Explanation:
Explanation
A multipage misfeed is when more than one sheet of paper feeds into the printer at once, causing paper jams or misprints. A multipage misfeed can be caused by low paper supply or wrinkled paper in the tray, as reported by the user in this case. High latency is not related to paper jams, but to network delays or slow performance.
Page orientation refers to whether the page is printed in portrait or landscape mode, which does not affect paper jams either. Driver mismatch could cause printing errors or compatibility issues, but not paper jams.
NEW QUESTION # 131
Which of the following types of devices MOST often uses a Thunderbolt cable?
- A. Apple laptop
- B. Chromebook
- C. Linux PC
- D. Android mobile
Answer: A
NEW QUESTION # 132
......
Study resources for the Valid 220-1101 Braindumps: https://exams4sure.pass4sures.top/A/220-1101-testking-braindumps.html